MCS Tools
The Tools page contains all the necessary programs to run a successful simulation on the MCS simulator. There are two downloads for each program: the program file and the archive file. The program file contains only the program itself, whereas the archive file includes the source code and the README for the program. | |||||
Program Name | Description | DOWNLOAD | |||
File Type | Version | Size | Date Posted | ||
bench2ver | Program that converts a file from type "benchmark" into "verilog." | program | 1.0 | 1094 kb | 6/8/04 |
archive | 1.0 | 13.3 kb | 6/8/04 | ||
bfault | This program scans the topology of a network file (.dee) and generates all possible bridging faults between any inputs of each AND and OR gate (up to 8 inputs). The output is saved in the file: (network_name)_b.fls. | program | 1.0 | 734 kb | 6/8/04 |
archive | 1.0 | 11.8 kb | 6/8/04 | ||
crest | This program extracts a symbol table from a (*.dee) file. | program | 1.0 | 6.5 kb | 6/8/04 |
archive | 1.0 | 16.9 kb | 6/8/04 | ||
cwsl | This program creates a WSL file from symbol table for MCS. | program | 1.0 | 55.8 kb | 6/8/04 |
archive | 1.0 | 162 kb | 6/8/04 | ||
decode | This program generates a list of all elements in a network (.dee) file. The output is saved in the file: (network_name).extr | program | 1.0 | 742 kb | 6/8/04 |
archive | 1.0 | 16.4 kb | 6/8/04 | ||
Dwc_mcs | This program compiles waveform files for the MCS simulator (converts waveform files from .dws to .dwe so MCS can read them). Note: The symbol table (.smt) must be present in network directory for program to run correctly. |
program | 1.0 | 68 kb | 6/8/04 |
archive | 1.0 | 147 kb | 6/8/04 | ||
fault_all | This program takes in a .dee file and outputs a file with the same name but adds the .fls extension. This file contains all possible faults at the inputs, outputs and bridged input faults of non_wire elements (ie gates, behavioral, ...). | program | 1.0 | 52.2 kb | 6/8/04 |
archive | 1.0 | 11.8 kb | 6/8/04 | ||
func_dgp2dwe | This program takes a waveform in dgp format (which func_waveformgen deals with) and turns it into a .dwe format (which the MCS simulator inputs) | program | 1.0 | 1100 kb | 6/8/04 |
archive | 1.0 | 57.9 kb | 6/8/04 | ||
func_waveformgen | The initial function called to generate a random waveform to put into the simulator. | program | 1.0 | 1100 kb | 6/8/04 |
archive | 1.0 | 59.9 kb | 6/8/04 | ||
IOfault | This program is a fault list generator for network (*.dee) files (possibly just Input/Output faults). | program | 1.0 | 50.7 kb | 6/8/04 |
archive | 1.0 | 5.6 kb | 6/8/04 | ||
Mcomp | This program converts (*.des) files to (*.deo) files. | program | 1.0 | 450 kb | 6/8/04 |
archive | 1.0 | 438 kb | 6/8/04 | ||
Mlink | This program converts (*.deo) files to (*.dee) files. | program | 1.0 | 356 kb | 6/8/04 |
archive | 1.0 | 402 kb | 6/8/04 | ||
Parse | This program converts Verilog (*.v) files to DEE (*.dee) files. | program | 1.0 | 203 kb | 6/8/04 |
archive | 1.0 | 1199 kb | 6/8/04 | ||
Tab2ws_mcs | This program converts tab (*.dgp) fault lists into (*.dws) waveform files. Note: Both the circuit description (.dee) and the symbol table (.smt) files must be present in the network directory for the function to work properly. |
program | 1.0 | 82.3 kb | 6/8/04 |
archive | 1.0 | 153 kb | 6/8/04 | ||
Tufault | This program takes in a .dee file and outputs a file with the same name but adds the .fls extension. This file contains all possible faults at the inputs of non_wire elements (ie gates, behavioral, ...). | program | 1.0 | 50.3 kb | 6/8/04 |
archive | 1.0 | 6.1 kb | 6/8/04 | ||
Tufault_o | This program takes in a .dee file and outputs a file with the same name but adds the .fls extension. This file contains all possible faults at the outputs of non_wire elements (ie gates, behavioral, ...). | program | 1.0 | 50.5 kb | 6/8/04 |
archive | 1.0 | 21.0 kb | 6/8/04 | ||